Đặc tính kỹ thuật WM3-1-01-1
Đồng hồ Đo Công suất WM3-1-01-1
Đồng hồ Đo Công suất
Điện áp 100-240VAC
Đầu ra điều khiển : 3 relay - Đầu ra phụ 4-20mA
Kích thước Cao 48 x ngang 96
Nhà sản xuất Hanyoung
| Power Supply |
| 100 - 240 V a.c. 50/60 ㎐ Allowable percentage of voltage difference : 85~110% |
|
| Power consumption |
|
| Display type |
|
| Insulation resistance |
Above 100 ㏁(500 V d.c mega standard) between external terminal and case |
| Max voltage durability |
Above 2000 V a.c, per 1 min between external terminal and case |
| Max noise durability |
Square wave noise due to noise simulator, pulse width 1 ㎲ ± 1000V |
Max vibration
durability |
10-50 ㎐ Malfunction, double amplitude in each 0.5mm X, Y, Z direction for 1 hour
10-50 ㎐ Durability, double amplitude in each 0.75mm X, Y, Z direction for 2 hours |
| Max shock durability |
100 ㎨ Malfunction each X, Y, Z direction for 3 times
300 ㎨ Durability each X, Y, Z direction for 2 times |
| Ambient temperature |
-10 ~ 55℃ (No freezing allowed) |
| Ambient humidity |
Relative humidity 35 ~ 85% R.H |
| Ambient environment |
Corrosiveness gas not allowed |
| Storage ambient temperature |
-20 ~ 65% ℃ (No freezing allowed) |
| Relay life |
Mechanically : 20,000,000 ps Min. Electrically : 100,000 ps Min. |
| Weight |
Approximately 300g |
| Measurement type |
| Cycle measuring type, cos ø =LEAD 0.8 - 1 - LAG 0.8 |
|
| Display cycle |
| Min. : 0.1 second, Max. 2 second |
|
| Displayable number of digits |
| -1999 ~ 9999 (4 digits standard) |
|
| Measuring list |
|
| Input range |
|
| Function of decimal point |
| Selection due to internal parameter |
|
| Function of scaling |
| Function of displaying temporal numerical values which is converted from measured (input) |
|
| Hold function |
| Automatic max and min Peak value detection hold and external hold |
|
| Control |
|
| Other functions |
- • Remote local switching(communication output type)
|
- • Display max / min value by front key
|
- • Function of handling average value and delaying displaying cycle
|
- • Changing comparative output setting
|
- • Set value changing protective function
|
|
| Output type |
|
|
- •Transistor output (NPN, PNP)
|
|
|
- • Communication output(RS485)
|
|